ConvertiBARS - Original
The Rhino - Adjustable Clip-ons
Stunt Series ConvertiBARS and Accessories
Bike Specific Kits
Additional Completion Products
Lines & Cables
Front Brake Lines
How It Works
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Kawasaki ZX-12R Bike Specific Kit
The Original Convertible Handlebar System
Black 51mm Convertible Handlebar Set (With V-ROC Technology) Fits 53mm OD Forks
Silver 51mm Convertible Handlebar Set (With V-ROC Technology) Fits 53mm OD Forks
Technical Specs Download
2000 - 2006 is a confirmed fit.
A confirmed installation means that ConvertiBARS, and or a customer, have successfully installed a ConvertiBARS Kit on a motorcycle within the range of years listed above and the rise listed below has been achieved, with or without longer lines, while being able to reach the steering stops without permanent damage to the motorcycle. The year range noted above is only an estimate of the years that the motorcycle appears to have had little or no change to the handlebars and fairing, and so the installer should find similar installation issues as noted in the bike specific install notes. A confirmed installation however, does not mean the kit is guaranteed to fit. ConvertiBARS is not liable for any labor times or costs associated with the installation or un-installation of either ConvertiBARS or the stock handlebars. Positioning restrictions between low and high positions do exist. See bike specific install notes for other installation and positioning issues.
*Maximum ConvertiBARS positioning capability.
Measurements are in inches, relative to the stock position, and with Proper Length Lines Position restrictions between low and high positions do exist. Measurements calculated with default handlebar below. See Bottom of page for rise capability with stock lines Fore = Further from the rider, Aft = Closer to the rider.
Important Installation Considerations
*Max Rise allowed with stock lines.
Stock Hydraulic Brake Line
Stock Clutch Line/Cable
Stock Throttle Line
Stock Electrical Lines
*ConvertiBARS travel relative to the stock location; measurements are in inches.
NOTES: Customer reports restrictions to Fore positions but suggests all
can be resolved with slightly modified top triple clamp and or cover. But with the stock triple clamp plus longer brake and clutch lines/cables, 6 inches of rise and 6 inches of reach adjustment is easy. He is a ZX 12
and suggests that some years may require slight mods to ram air covers but other years may not.??
Please call before ordering to confirm a few details!!!
ZX-6R, 6RR & 636 (2005-08)
Kawasaki ZX-6R, 6RR & 636- 2013 Bike Specific Kit
Kawasaki ZZR600(2005) Bike Specific Kit
Kawasaki ZX-6R (98-02) Bike Specific Kit
Kawasaki ZX-6RR636(03-04) Bike Specific Kit
Kawasaki Z1000 Bike Specific Kit 2003
Kawasaki ZZR1200 Bike Specific Kit
Kawasaki ZX-9R (98) Bike Specific Kit
Share your knowledge of this product.
Be the first to write a review »