ConvertiBARS - Original
The Rhino - Adjustable Clip-ons
Stunt Series ConvertiBARS and Accessories
Bike Specific Kits
Additional Completion Products
Lines & Cables
Front Brake Lines
How It Works
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Ducati ST-4(03) Bike Specific Kit
Price with Selected Options:
The Original Convertible Handlebar System
Silver 53mm Convertible Handlebar Set (With V-ROC Technology) Fits 50mm OD Forks
Ducati ST-4 Top Clamp Adapters
Required Adapter uses existing mounting holes in top triple clamp. Use 53mm Cyclops clamp [Add $49.99]
Technical Specs Download
is a confirmed ConvertiBARS installation.
A confirmed installation means that ConvertiBARS, and or a customer, have successfully installed a ConvertiBARS Kit on a motorcycle within the range of years listed above and the rise listed below has been achieved, with or without longer lines, while being able to reach the steering stops without permanent damage to the motorcycle. The year range noted above is only an estimate of the years that the motorcycle appears to have had little or no change to the handlebars and fairing, and so the installer should find similar installation issues as noted in the bike specific install notes. A confirmed installation however, does not mean the kit is guaranteed to fit. ConvertiBARS is not liable for any labor times or costs associated with the installation or un-installation of either ConvertiBARS or the stock handlebars. Positioning restrictions between low and high positions do exist. See bike specific install notes for other installation and positioning issues.
*Maximum ConvertiBARS positioning capability.
Measurements are in inches, relative to the stock position, and with Proper Length Lines Position restrictions between low and high positions do exist. Measurements calculated with default handlebar below. See Bottom of page for rise capability with stock lines Fore = Further from the rider, Aft = Closer to the rider.
Important Installation Considerations.
Great fit up. Lots of positioning ability. Underside of triple clamp has locator pins that if pulled, will allow more rear positioning.
are necessary to achieve any meaningful rise/reach adjustment
*Max Rise allowed with stock lines.
Stock Hydraulic Brake Line
Stock Hydraulic Clutch Line
Stock Throttle Line
Stock Electrical Lines
*ConvertiBARS travel relative to the stock location; measurements are in inches.
ST-2 & ST-4(98-02)
Ducati 900SS Bike Specific Kit
Ducati 900, 996, 998 Bike Specific Kit
Ducati 1098 Bike Specific Kit
Ducati Monster (2002) Bike Specific Kit
Ducati 620, 800, 750 Sport Bike Specific Kit
Ducati Sport Classic(1000S) Bike Specific Kit
Ducati 749, 999 Bike Specific Kit
Ducati 1000S & DS Bike Specific Kit
Share your knowledge of this product.
Be the first to write a review »