ConvertiBARS - Original
The Rhino - Adjustable Clip-ons
Stunt Series ConvertiBARS and Accessories
Bike Specific Kits
Additional Completion Products
Lines & Cables
Front Brake Lines
How It Works
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Aprilia RSVR1000 Factory(04) Bike Specific Kit
Price with Selected Options:
The Original Convertible Handlebar System
Black 51mm Convertible Handlebar Set (With V-ROC Technology) Fits 51mm OD Forks
Silver 53mm Convertible Handlebar Set (With V-ROC Technology) Fits 53mm OD Forks
Bike Specific Completion Pack
Front Brake Line:
Silver/Clear (Alt-2 Dual-two lines) 3 inches Longer Than Stock [Add $98.95]
Silver/Clear(Three Line Kit) 4 inches Longer Than Stock [Add $139.93]
Black/Black(Three Line Kit) 4 inches Longer Than Stock [Add $149.93]
Silver/Clear (Hydraulic) 3 inches Longer Than Stock, Teflon lined, Steel Braided [Add $69.95]
Black/Black (Hydraulic ) 3 inches Longer Than Stock, Teflon lined, Steel Braided [Add $76.95]
Technical Specs Download
Aprilia RSVR1000 Factory(04)
is a confirmed ConvertiBARS installation.
A confirmed installation means that
, and or a customer, have successfully installed a ConvertiBARS Kit on a motorcycle within the range of years listed above and the rise listed below has been achieved, with or without longer lines, while being able to reach the steering stops without permanent damage to the motorcycle. The year range noted above is only an estimate of the years that the motorcycle appears to have had little or no change to the handlebars and fairing, and so the installer should find similar installation issues as noted in the bike specific install notes. A confirmed installation however, does not mean the kit is guaranteed to fit. ConvertiBARS is not liable for any labor times or costs associated with the installation or un-installation of either ConvertiBARS or the stock handlebars. Positioning restrictions between low and high positions do exist. See bike specific install notes for other installation and positioning issues.
*Maximum ConvertiBARS positioning capability.
Measurements are in inches, relative to the stock position, and with Proper Length Lines Position restrictions between low and high positions do exist. Measurements calculated with default handlebar below. See Bottom of page for rise capability with stock lines Fore = Further from the rider, Aft = Closer to the rider.
Important Installation Considerations.
Stock Clutch line will allow 3" of rise if rerouted.
*Max Rise allowed with stock lines.
Stock Hydraulic Brake Line
Stock Hydraulic Clutch Line
Stock Throttle Line
Stock Electrical Lines
*ConvertiBARS travel relative to the stock location; measurements are in inches.
RSV1000 Mille R(-03)
Aprilia RSV1000 (04) Bike Specific Kit
Aprilia Futura Bike Specific Kit
Aprilia Tuono R Bike Specific Kit
Aprilia RSV1000 Mille (98-03) Bike Specific Kit
Aprilia Tuono(02) Bike Specific Kit
Aprilia SL1000 Falco Bike Specific Kit
Aprilia RSV4 Factory Bike Specific Kit
Aprilia RSV1000 Mille R (-03) Bike Specific Kit
Share your knowledge of this product.
Be the first to write a review »